ORIGINAL PAPER
Figure from article: Optimization of Operational...
 
KEYWORDS
TOPICS
ABSTRACT
Raw mangoes used for preparation of pickle, chutney etc. which are consumed daily. Traditionally, raw mango cutting is time consuming and labour-intensive task. To overcome such issues, a power operated machine for cutting raw mangoes was developed to enhance the cutting efficiency. To optimize the machine's performance central composite design was used using response surface methodology by Design Expert software. The study aimed to determine the optimal cutting shaft speed and feeding rate of mangoes for maximizing cutting capacity, cutting efficiency, and minimizing damage percentage. The optimal cutting shaft speed and feeding rate was found to be 34.5 rpm and 12 kg/h, respectively. The experimental results at optimal level was observed: maximum cutting capacity and cutting efficiency of 110 kg/h and of 81.98%, respectively, and minimum damage percentage of 17.26%. The average dimensions of cubes of raw mangoes were observed 35.5 mm length, 27.2 mm width and 1.7 mm thickness.
REFERENCES (22)
1.
Anonymous (2019). Mango Processing. Anna University. https://shodhganga.inflibnet.a... (accessed on 15.02.2019).
 
2.
APEDA. (2025). Mango. Agricultural & Processed Food Products Export Development Authority (APEDA). Ministry of Commerce and Industry, Govt. of India. https://apeda.gov.in/Mango (accessed on 21.12.2025).
 
3.
BIS. (1999). Mango Pickle - Specification (IS 4670:1999). Bureau of Indian Standards. New Delhi.
 
4.
Chen, G., Chen, J., Srinivasakannan, C., & Peng, J. (2012). Application of response surface methodology for optimization of the synthesis of synthetic rutile from titania slag. Applied Surface Science, 258 (7), 3068–3073. https://doi.org/10.1016/j.apsu....
 
5.
Dissanayake, T. (2009). Development of a manually operated mango dicing machine. [Unpublished master’s thesis], Maharana Pratap University of Agriculture And Technology, Udaipur. Repository. https://krishikosh.egranth.ac.....
 
6.
Gaikwad, M. (2015). Development of slicing and cubing machine for raw mango. [Unpublished master’s thesis], Anand Agricultural University, Gujarat. Repository. http://krishikosh.egranth.ac.i....
 
7.
Jha, S. N., Jaiswal, P., Narsaiah, K., Kaur, P. P., Singh, A. K., & Kumar, R. (2013). Textural properties of mango cultivars during ripening. Journal of food science and technology, 50(6), 1047-1057. https://doi.org/10.1007/s13197....
 
8.
Karate, M., Kamble, K., & Kad, V. (2022). Design, development and performance evaluation of power operated raw mango cutting machine. The Pharma Innovation Journal, 11(12), 1694-1700.
 
9.
Karate, M., Kamble, K., & Khobragade, U. (2023). Physical and engineering properties of raw mango fruit relevant to raw mango cutting machine. Multilogic In Science, 13(47), 959 – 963.
 
10.
Lan, Y., Peng, P., Shi, B. (2011). Optimization of preparation conditions for PDMS-silica composite prevaporation membranes using response surface methodology. Separation Science and Technology, 46(14), 2211–2222. https://doi.org/10.1080/014963....
 
11.
Mandhar, S.C., & Kumaran, G.S. (2000). Machinery for raw mango processing. Acta Horticulturae, 509, 523-530. https://doi.org/10.17660/ActaH....
 
12.
Masibo, M., & He, Q. (2009). Mango bioactive compounds and related nutraceutical properties – a review. Food Reviews International, 25(4), 346–370. https://www.tandfonline.com/do....
 
13.
Meena, R., Patil, S., Yadav, N., Sagore, B., Prachi, P., & Meena, B. … Anushi. (2023). Studies on Preparation of Mango Pickle from Different Genotypes of Akola Maharashtra Region. International Journal of Plant & Soil Science, 35(23), 474-483. https://doi.org/10.9734/ijpss/....
 
14.
Nath, A., & Chattopadhyay, P. K. (2007). Optimization of oven toasting for improving quality of ready-to-eat raw mango pickle. Journal of Food Quality, 80(4), 1282-1292. https://doi.org/10.1016/j.jfoo....
 
15.
Patil, S.B., & Chendake, A.D. (2017). Development of multipurpose punching and cutting machines. International Journal of Agricultural Science and Research (IJASR), 7(2), 177-188.
 
16.
Salve, V. A., Kad, V. P., Kamble, K. J., & Kadam, P. B. (2020). Evaluation of Manually Operated Raw Mango Cutting Machine. Journal of Krishi Vigyan, 8(2), 129-132. DOI:10.5958/2349-4433.2020.00027.6.
 
17.
Saravacos, G., & Kostaropoulos, A. E. (2016). Size Reduction – Effect of Feed Rate on Product Quality. In Handbook of Food Processing Equipment (2nd ed.). Springer. https://doi.org/10.1007/978-3-....
 
18.
Şeker, U., Kurt, A., & Ciftci, I. (2004). The effect of feed rate on the cutting forces when machining with linear motion. Journal of Materials Processing Technology, 146(3), 403-407. https://doi.org/10.1016/j.jmat....
 
19.
Shahid, U., Hussain, S., Nadeem, M., Jabbar, S., Qureshi, T. M., Nasir, M. U., Zahra, S. M., & Rashid, F. (2015). Quality assessment of the mango-mandarin (kinnow) squash during storage. Science Letters, 3(3), 115-121.
 
20.
Sirisomboon, P., Boonmung, S., Pornchaloempong, P., & Pithuncharurnlap, M. (2008). A preliminary study on classification of mango maturity by compression test. International Journal of Food Properties, 11(1), 206–212. http://dx.doi.org/10.1080/1094....
 
21.
Sonawane, S. P., Sharma G. P., Pandya A. C. (2011). Design and development of power operated banana slicer for small scale food processing industries. Research in Agricultural Engineering, 57(4), 144-152.
 
22.
Vasugi, C., Sekar, K., Dinesh, M. R., & Suresh, E. R. (2008). Evaluation of unique mango accessions for whole-fruit pickle. Journal of Horticultural Sciences, 3(2), 156-160. https://www.redalyc.org/articu....
 
eISSN:2719-423X
ISSN:1642-686X
Journals System - logo
Scroll to top